'RE: [dm-devel] failover does not work with rdac device handler'

[prev in list] [next in list] [prev in thread] [next in thread] 

List:       dm-devel
Subject:    RE: [dm-devel] failover does not work with rdac device handler
From:       Mario Mech <mech () meteo ! uni-koeln ! de>
Date:       2009-06-24 16:09:02
Message-ID: 4A424F9E.1050403 () meteo ! uni-koeln ! de
[Download RAW message or body]

Hi,

I need help with a similar or even the same issue as in the thread mentioned in the \
Subject  (https://www.redhat.com/archives/dm-devel/2008-October/msg00130.html).

On two PowerEdge 2970 with CentOS 5.3 connected to a MD3000i I get the following \
messages in /var/log/messages

Jun 24 17:57:49 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:49 ninja kernel: end_request: I/O error, dev sdc, sector 530184
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Failing path 8:32.
Jun 24 17:57:49 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:49 ninja multipathd: 8:32: mark as failed
Jun 24 17:57:49 ninja multipathd: mpath8: remaining active paths: 3
Jun 24 17:57:49 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:49 ninja kernel: end_request: I/O error, dev sdd, sector 530184
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Failing path 8:48.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Cannot failover device \
                because scsi_dh_rdac was not loaded.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Failing path 8:80.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Could not failover device. \
                Error 15.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Cannot failover device \
                because scsi_dh_rdac was not loaded.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Failing path 8:64.
Jun 24 17:57:49 ninja kernel: device-mapper: multipath: Could not failover device. \
                Error 15.
Jun 24 17:57:49 ninja kernel: GFS2: fsid=ninjo_cluster:gfsfs.0: gfs2_quotad: statfs \
                error -5
Jun 24 17:57:49 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:50 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:50 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:50 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:50 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:50 ninja multipathd: 8:48: mark as failed
Jun 24 17:57:50 ninja multipathd: mpath8: remaining active paths: 2
Jun 24 17:57:50 ninja multipathd: 8:64: mark as failed
Jun 24 17:57:50 ninja multipathd: mpath8: remaining active paths: 1
Jun 24 17:57:50 ninja multipathd: 8:80: mark as failed
Jun 24 17:57:50 ninja multipathd: mpath8: remaining active paths: 0
Jun 24 17:57:54 ninja multipathd: 8:32: reinstated
Jun 24 17:57:54 ninja multipathd: mpath8: remaining active paths: 1
Jun 24 17:57:54 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:54 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:55 ninja multipathd: 8:64: reinstated
Jun 24 17:57:55 ninja multipathd: mpath8: remaining active paths: 2
Jun 24 17:57:55 ninja multipathd: 8:80: reinstated
Jun 24 17:57:55 ninja multipathd: mpath8: remaining active paths: 3
Jun 24 17:57:55 ninja multipathd: 8:48: reinstated
Jun 24 17:57:55 ninja multipathd: mpath8: remaining active paths: 4
Jun 24 17:57:55 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:55 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:55 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:55 ninja multipathd: dm-3: devmap already registered
Jun 24 17:57:55 ninja multipathd: dm-3: add map (uevent)
Jun 24 17:57:55 ninja multipathd: dm-3: devmap already registered

The following additional information can I provide.

[root@ninja redhat]# lsmod | egrep 'rdac|multi'
scsi_dh_rdac           40897  1
dm_multipath           55257  2 dm_round_robin
scsi_dh                41665  2 scsi_dh_rdac,dm_multipath
dm_mod                100369  18 \
dm_multipath,dm_raid45,dm_snapshot,dm_zero,dm_mirror,dm_log scsi_mod              \
196569  10 scsi_dh_rdac,ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,scsi_dh,sg,libata,megaraid_sas,sd_mod

[root@ninja redhat]# multipath -ll
mpath8 (360024e80004ec0de000010324a373eeb) dm-3 DELL,MD3000i
[size=7.5T][features=0][hwhandler=1 rdac][rw]
\_ round-robin 0 [prio=200][enabled]
  \_ 7:0:0:0  sde 8:64  [active][ghost]
  \_ 5:0:0:0  sdf 8:80  [active][ghost]
\_ round-robin 0 [prio=0][enabled]
  \_ 8:0:0:0  sdd 8:48  [active][ready]
  \_ 6:0:0:0  sdc 8:32  [active][ready]

The multipath version shipped with CentOS 5.3 is multipath-tools v0.4.7 (03/12, \
2006).

As I've seen in the mentioned thread something like

echo rdac > /sys/block/sd?/device/dh_state

should fix at least the failover problem.

But I do not see any dh_state in /sys/block/sd?/device/ and I'm not allowed (even as \
root) to do anything like:

for i in c d e f; do echo rdac > /sys/block/sd$i/device/dh_state; done

At the moment I'd like to avoid building the multipath package by myself with the \
patch provided in the afore mentioned thread.

Do you have any ideas? Or is a different problem I have.

Every help is appreciated.

All best

Mario

-- 
Dr. Mario Mech

Institute for Geophysics and Meteorology
University of Cologne
Zuelpicherstr. 49a
50674 Cologne
Germany

t: +49 (0)221 - 470 - 1776
f: +49 (0)221 - 470 - 5198
e: mech@meteo.uni-koeln.de
w: http://www.meteo.uni-koeln.de/~mmech/

--
dm-devel mailing list
dm-devel@redhat.com
https://www.redhat.com/mailman/listinfo/dm-devel

[prev in list] [next in list] [prev in thread] [next in thread] 